Fujikura 88S Core Alignment Single Fusion Splicer with CT-08 Cleaver

Description

Contact us
Soldering Equipment
Measuring Equipment
Ultrasonic Cleaners
Consumables
Fiber Optic Tools
Bundle offers
STEM Toys & Hobbies
Visit shop
Fujikura 88S
is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.
The 88S possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The tool finds the true core position and achieves the consistent lower splice loss. The device features fiber discrimination function: it automatically identifies the optimum arc discharge parameters in accordance with the fiber type.
Fujikura 88S has faster automated features that reduce installation time. The user can complete the entire splicing process without touching the tool and only moving the fiber. The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out.
Features
Splicing time: 7-9 sec (SM FAST mode).
Heat time: 13-15 sec (for 60 mm sleeves).
Core alignment technology.
Advanced image processing technology.
Fiber discrimination function.
The faster automated features.
Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
Easy fiber protection sleeve positioning.
The lid of the carrying case may be used as a work table.
Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
The sheath clamp is compatible with loose tube fiber.
Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
The tool can connect two cleavers simultaneously.
Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
Operation manual is installed into the splicer.
Battery life increased up to 500 recharge cycles.
Increased electrode lifetime – up to 5000 splicing cycles with one set.
5-inch color TFT touch screen display.
Technical Specifications
Fiber alignment method
active core alignment
Applicable fiber
fiber type
Single mode optical fiber
Multi mode optical fiber
cladding diameter
80 μm - 150 μm
Applicable coating
sheath clamp
coating diameter: max. 3 000 μm
cleave length: 5 mm - 16 mm
Fiber splice performance
splice loss
ITU-T G.652: avg. 0.02 dB
ITU-T G.651: avg. 0.01 dB
ITU-T G.653: avg. 0.04 dB
ITU-T G.655: avg. 0.04 dB
ITU-T G.657: avg. 0.02 dB
splice time
SM FAST mode: avg. 7 sec - 9 sec
AUTO mode: 14 sec - 16 sec
Applicable protection sleeve
sleeve type
heat shrinkable sleeve
sleeve length
max. 66 mm
sleeve diameter
max. 6.0 mm before shrinking
Sleeve heat performance
heat time
60 mm slim mode: avg. 9 sec - 10 sec
60 mm mode: avg. 13 sec - 15 sec
Fiber tensile test force
approx. 2.0 N
Electrode life
approx. 5 000 splices
Dimensions (W × D × H)
170 × 173 × 150 mm
Weight
2.8 kg (with battery)
Environmental condition
temperature
operate: -10°C - +50°C
storage: -40°C - +80°C
humidity
operate: 0% - 95% RH non-condensing
storage: 0% - 95% RH non-condensing
altitude
max. 5 000 m
AC adaptor
input
AC 100 to 240 V, 50/60 Hz, max. 1.5 A
Battery pack
type
rechargeable lithium-ion
output
approx. DC 14.4 V / 6,380 mAh
capacity
approx. 300 splice and heat cycles
temperature
recharge: 0°C - 40°C
storage: -20°C - +30°C
battery life
approx. 500 recharge cycles
Display
LCD monitor
TFT 5 inches with touch screen
magnification
200 to 300x
Illumination
V-grooves
LED lamp
Interface
PC
USB2.0 Mini B type
external LED lamp
USB2.0 A type
approx. DC 5 V, 500 mA
ribbon stripper
Mini DIN 6 pin
DC 12 V, max. 1 A
wireless
Bluetooth 4.1 LE
Data storage
splice mode
100 splice modes
heat mode
30 heat modes
splice result
20 000 splices
splice image
100 images
Screw hole for tripod
1/4-20UNC
Other features
automatic functions
splice mode select by fiber type analysis
discharge power calibration
wind protector: open/close
sheath clamp: open
heater lid: open/close
heater clamp: open/close
reference guide
video and PDF file stored in splicer
sheath clamp
easy sleeve positioning clamp
electrode
replaceable without tool
Package Contents
Fusion Splicer Fujikura 88S — 1 pc.
Battery (BTR-15) — 1 pc.
AC Adaptor (ADC-20) — 1 pc.
AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
USB Cable (USB-01) — 1 pc.
Fusion Splicer Strap (ST-02) — 1 pc.
Spare Electrodes (ELCT-16B) — 1 set.
Fiber Holder Set Plate (SP-03) — 1 set.
Carrying Case (CC-39) — 1 pc.
Work Tray Left (WT-09L) — 1 pc.
Work Tray Right (WT-09R) — 1 pc.
Work Tray J-Plate (JP-09) — 1 pc.
Tripod Screw (TS-03) — 1 pc.
Carrying Case Strap (ST-03) — 1 pc.
Alcohol Dispenser (AP-02) — 1 pc.
Quick Reference Guide (QRG-02-E, C or J) — 1 pc.
Single Fiber Stripper (SS-03 or SS-01) — 1 pc.
Optical Fiber Cleaver (CT-08) — 1 pc.
Fiber Scrap Collector (FBD-05) — 1 pc.
Fiber Setting Plate (AD-10-M24) — 1 pc.
Case for Cleaver (CC-37) — 1 pc.
Hexagonal Wrench (HEX-01) — 1 pc.
Please note that all goods are shipped from Hong Kong. Therefore, additional charges may apply for customs clearance in your region.
Package content and appearance may differ from those presented on the website. Please ask the sales specialist before purchase.