Constant Current Emergency Backup Battery, 4.9-10W, 14-28VDC, 350mA or 500mA, UL

Description

The emergency battery, along with the driver, allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the emergency driver switches to the emergency mode and operates one or two of the existing lamps for a minimum of 90 minutes. Requires Apex Constant Current Emergency LED Driver Part Number AL-LEDEM-CC-DRIVER.
Technical Specifications (with Driver):
Provides constant current (350 or 500 mA) output to the load during emergency mode operation.
Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD.
Universal 120-277V, 50/60 Hz input
Charge/Power “ON” LED indicator light and push-to-test switch for mandated code compliance testing
Long-life, maintenance free, rechargeable NiCad battery
Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault
90 minute minimum emergency operating time over full temperature range (other run times available upon request)
24 Hour maximum battery recharge time
LED emergency driver is equipped with a switch to choose 350mA or 500mA constant current output
Output classification: Class 2 Compliant
Surge protection: Per C62.41 (TVS)
Input overcurrent protection: Fusible link
LED illuminated and remote mounted test switch
Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish
Suitable for installation inside or top of the fixture
UL Recognized for factory installation
Suitable for damp locations (0°C - 50°C)
5 year warranty on all electronics and housing
Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes
Contact us for bulk discounts and current specials.
Click here to view Specification Sheet
Listing and template services provided by inkFrog