Clam Shell Fishing Seats Charcoal and Blue

Description

Clam Shell Folding Boat Seats
Pedestal mount boat seat with hold down strap
Boat seat folds flat and can be strapped shut
Factory Grade Replacement Seats
3 year full replacement warranty on upholstery
30oz soft to the touch, marine grade seat vinyl
Heavy duty hold down straps will not stretch or fail
Installing Your Boat Seats
Hardware Included:
1. (4) stainless steel mounting bolts are pre-installed into the plastic seat bottom.
DeckMate Boat Seats
Will Install On Any Pedestal Mount
1.
Remove the temporary plastic edge protectors from the front corners of your new boat seat.
These are installed to protect the fishing seats during storage and shipping.  Simply pull the edges of the plastic protectors and pull the staples out, this will not hurt the boat seat.
2.  Unscrew the (4) mounting bolts from under the boat seat's frame.
3.  Install the pedestal seat mount to the bottom of the fishing seat's plastic frame using the bolts.
Note:  Some pedestal seat mounts have a front, check your mount to insure it is installed properly.  Also, start each mounting bolt by hand to prevent mis-threading of the t-nuts that are inserted into the bottom of the boat seat frame.