100pcs 60mm Heat Shrink Tube For Fusion Splicer FTTH Fiber Protection Sleeves

Description

Fusion Splice Protection Sleeves FPS-60
Product introduction：
FPS-60 is an optical fiber splicing protection element composed of cross-linked polyene warp, hot melt tube and reinforced stainless steel wire. Does not affect the optical properties of the optical fiber. Protect the connection point and improve the mechanical strength. Reduce the risk of fiber damage during installation. The transparent sleeve makes the fiber connection status clear at a glance. The sealed structure makes the splice have good temperature and humidity resistance.
Product feature：
Sealing at both ends does not drop pins, flame-retardant insulation
Using 304 stainless steel single needle, the fixation is firmer and does not rust
Suitable for 3.0mm patch cords, 0.9mm pigtails, bare fiber butt
The two ends of the steel needle are chamfered to prevent the optical fiber (pigtail) from breaking and ensure that the optical fiber signal is not damaged
Specification：
Name
Fusion Splice Protection Sleeves
Type
FPS-60
Diameter
3.0*40mm
S
pecification
100
pieces